供貨總量:50000公斤
發貨地點:廣東省東莞市
發布時間:2019-11-30
一款溶劑型高端雙組份多功能絲印、移印油墨。附著力強、超級耐候、耐溫(白色230度烘烤30分鐘不黃變)、耐沖壓、耐酸耐堿、耐酒精、耐水煮水泡。光澤佳、色澤飽滿、流平性優異、印刷平整無針孔、遮蓋佳。
Vantan 71 series is a solvent-based high-end two-component multi-functional screen printing ink and pad printing ink. With strong adhesion, super strong atmospheric corrosion resistance, temperature resistance (no yellowing when the white is baked at 239℃ for 30 minutes), stamping resistance, acid and alkali resistance, alcohol resistance, boiling and soaking resistance. Good gloss, full color, excellent levelling property, good smoothness of printing without pinhole, good coverage.
適用范圍 Applied range:
適合印刷玻璃、金屬、烤漆涂層、硬化材料等;應用于觸摸屏視窗、高端家電面板、高端電器面板、高端電子產品等行業。
Suitable for printing on glass, metal, coating of stoving varnish, hardening materials and so on; used in the window of touch screens, high-end appliance panels, high-end electrical panels, high-end electronic products and so on.
使用方法Method of use :
u 印刷前請清洗印刷表面并過烘干機烘干玻璃。
u Please clean the printing surface and dry the glass with drier before printing.
u 固化劑和烘烤條件:添加P600\P630\P670固化劑;油墨:固化劑=100;10; 烘烤60-160度,10-30分鐘。
u Curing agent and drying conditions: add P600\P630\P670 curing agent; printing ink : curing agent=100:10; drying at 60℃ to 160℃ for 10 to 30 minutes.
u 稀釋劑:根據印刷方式和環境條件添加10%左右稀釋劑調節油墨稀稠度。
u Diluent: add about 10% diluent to adjust the consistence of the printing ink according to the printing method and environmental conditions.
u 添加本公司不同的固化劑可得到不同的墨層性能,具體使用請咨詢本公司技術人員。
u Different ink layer performance can be obtained by adding different curing agent of our company, please consult technical staff of our company for specific use.
Be careful:
注意事項Be careful :
u 玻璃清洗后必須烘干玻璃,潮濕天盡量避免施工。
u Dry the glass after cleaning, try to avoid operation in wet weather.
u 功能測試(如:耐化學測試、水煮、水泡等)必須在油墨充分固化并放置24小時后進行。
Function test (e.g. chemical resistance test, boiling resistance test, soaking resistance test and so on) it should beperformed after the printing ink is fully solidified and rested for 24 hours.
u 已添加固化劑的油墨必須在規定的時間內使用完,并不得收回至原包裝內。
The printing ink with curing agent should be used up within the specific time and shall not be recycled to the original package.